Modular Buildings and Analyzer Houses

SPS can provide a full FRP building using a "vacuum bagging" method, with wall panels with up to 2-3/4" insulation, 1', 2', 3' and 4' wide by 13 foot tall, assembling with 2" to 4" @ 1/8"or 1/4" thick pultrusion posts. Pultrusion posts can now be insulated as an option to provide overall R20+ ratings for our buildings.

A 4,000 lbs load test performed has proved that our new panels are strong and rugged. Calculations and tests on these panels to ensure that the customer is getting the most indestructible building manufactured from fiberglass. The following is a picture of the 4,000 lb load test performed at SPS.

 

Combining care using bulkhead areas in the insulation to maintain the integrity of the insulation when doing entrance and exit points, along with the ability to produce coated steel and SS substructures with or without insulation, the final structure meets all parameters required in the industry with the substantial savings of a modular building. Lifting eyes connected through the posts to the substructure provide easy mobility no matter what the final weight. The resultant buildings are ideal for use because they are light and portable, yet fully insulated to an overall rating of R20+. These buildings are manufactured without wood or metal reinforcing, because of the strength of the materials when manufactured with the vacuum bagging method.

Large rugged analyzer buildings are now being manufactured with reinforcing because of the weight and magnitude of the analyzers being installed. Buildings can now be fully loaded and transported filled with Instrumentation on-board.

The analyzer houses are constructed of fiberglass, insulated with foam, and have been tested to ensure that the enclosure will maintain the temperature that you specify, even at -40 deg. C , and a 30 MPH wind! Sloped, peaked and flat roofs are available. Up-to-date pictures (below), CAD files and PDF documents of our analyzer houses are available online.

Modular Building Pictures
(Colour, Size and Features)

Grey 7'8"(W) x 14'10"(L) x 8' (H), Dist Box, 2 Lights, a heater,12-4 Explosion proof fan. CLASS 1 DIV1 Group C&D Rating C/W Lovers and hoods. Air intake included.
Grey 13'2"(w) x 19'6"(L) x 14'4" (H), comes with an I-Beam, gable ends, 10' equipment doors.
Grey, 22'(l) x 14'(w) x 10'(h), Two man doors, sloped roof, lift eyes, j-track base.
Grey, elevated installation
Grey, 20'(l) x 14'(w) x 10'(h), Sloped roof, door threshold, internal unistrut.
Grey, 2'(l) x 4'(w) x 6'(h), Double front door, Custom doors in panels, custom overhang.
Red, 23'(l) x 6'(w) x 10'(h), Two double front doors. Custom vents, lifting eyes, sloped roof.
Grey, 2'(d) x 6'(w) x 7'(h) comes with floor grate, and steam heater.
Blue, 12'(l) x 12'(w) x 8'(h) control room. Multiple windows, computer floor, A/C and heat.
White, 36'3"(l) x 17'9"(w) x 10'(h), comes with I-beam, internal dividing wall, drywall
White, 24'(l) x 18'(w) x 10'(h), comes with I-beam, Lifting eyes, 2 man doors.
Grey, Large slope roof from 8' to 9'. Multiple buildings for shipment over seas.
White, 17'(l) x 10'(w) x 10'(h), awnings and windows.
White, 8'(l) x 4'(w) x 7'(h) awnings, windows
White extended length, fully loaded inside and out with analyzers and enclosures.


Home | General Info | Products | Services | Contact Us

© 2001 SPS Inc. All Rights Reserved.